Arcana Hearts 3 Launcher by Howard Casto
========================


Setup:
========================
Open the lconfig.ini.

The following settings pretain to AH3.

XKey= The virtual key code for the exit key... set to 27 (Escape) by default.

Coin1Key= The player 1 coinup/test key.  set to 53 (5 key) by default
Coin2Key= The player 2 coinup/test key.  set to 54 (6 key) by default

NOTE:  AH3 has locked coin inputs thus far and thus far only the two service keys (which add coins) have been found.  The coin1 and coin2 keys simply send the signal to press F1 and F2.

TestKey= The key to enter the service menu.  

NOTE:  Like coin1/2, the test key is hardcoded to F12.  The key you define simply passes along the f12 signal.


EXE=The exe name.  The version I have defined seems to be the best version so use that.  


Reconfiguring Launcher Keys (coin1, coin2, exit and test):
===========================================================

Simply change the values in the lconfig as defined above.  Use the included exe to get virtual key codes.


Reconfiguring Game Keys:
========================
Drag your game exe onto the included AH30CFG.exe, which I did NOT write.  Keep in mind that the values are written inside the exe, so If I were you I would keep a backup handy.


Handy Translation for our non Portuguese speaking friends (myself included)


Cima = Up
Baixo= Down
Esquerda= Left
Direita= Right

Ficha= Token (I'm guessing they mean coin up).


Credits:
=========
The wrapper is by Me, I found the controler cfg exe on some random site and it was uncredited.